Wash-down Spray Gun (Heavy Duty) with Brass Swivel

Our most popular selling wash down spray gun WITH a 1/2" BSP female swivel

Heavy duty wash-down gun | 1/2" BSP inlet on spray gun | 1/2" BSP inlet on swivel

High quality with a brass construction and with FDA / DVGW Seals.

• Strong brass housing
• Cover from EPDM rubber
• Seals from EPDM (FDA / DVGW)
• Trigger handle and pusher in St. St.
• 1/2" BSP female connection (gun)
• Max. Temp.95 ºC (200 º F)
• Max pressure 24 bar (350 psi)
• Weight about 840 gram
• Controllable beam pattern from broad spray to strong jet
• Clear red arrow showing the beam direction

The additional brass swivel improves user experience as it allows for ease of movement on the attached hose. It is a good accessory to use with all of the 1/2" female inlet wash-down guns . The swivel prevents the hose from twisting and it therefore increases the life of the hose too.

Brass ball bearing swivel, 1/2" BSP male x 1/2" BSP female with flat seal, 9mm bore. The brass swivels uses EPDM (FDA) seals.

These swivels are for the low pressure environment and can take up to 30 bar.

*** Although all materials used can withstand temperatures up to over 100º C, it is strongly recommended to take special precautions when using hot water ***

• Wash down gun Code: AKMN001-B
• S wivel Code: SWM09-1/2
• Full product code: AKMN001-B-SWM1/2